Setup DHCP Server IP 首先設定一組IPv6 IP在要處理DHCP的網卡上: 設定完後記得重新啟動網卡，並確認有正確配置。 [ root @ localhost ~ ] # ifconfig eno2 eno2: flags = 4163 < UP,BROADCAST,RUNNING,MULTICAST > mtu 1500 inet 10.68.0.6 netmask 255.255.255.0 broadcast 10.68.0.255 inet6 fe80::1e62:126a:5e95:ff1e prefixlen 64 scopeid 0x20 < link > inet6 fc00:: 1 prefixlen 7 scopeid 0x0 < global > ether 00: 25 : 90 :4b:6c:3f txqueuelen 1000 ( Ethernet ) RX packets 520773 bytes 778706143 ( 742.6 MiB ) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 61432 bytes 4300571 ( 4.1 MiB ) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device memory 0xfb900000-fb91ffff Setup DHCP Service Install DHCP server: yum install dhcp 修改IPv6 dhcp設定(/etc/dhcp/dhcpd6.conf)，加入以下內容: default-lease-time 2592000 ; preferred-lifetime 604800 ; option dhcp-renewal-time 3600 ; option dhcp-rebinding-time 7200 ; allow leaseq...